In stock | Usually dispatched within 24 hours
Upgrade your at-home facial routine with the StylPro At-Home LED & Microcurrent Facial Glow Bundle, a facial device duo designed to visibly firm, smooth and brighten complexions.
Set Contents:
StylPro Wavelength LED Face Mask
The device addresses a variety of cosmetic skin concerns with four carefully curated modes. Red (633nm) and Near Infrared (830nm) LED light therapy help to visibly firm the skin, improve the look of texture and reduce the appearance of wrinkles. Blue (415nm) light therapy promotes a clearer-looking complexion, making it suitable for people with blemish-prone skin. The fourth mode includes red, blue and near-infrared LEDs for an overall skin boost. Soft, lightweight, non-invasive and versatile, the STYLPRO Wavelength is suitable for all skin types. Includes: Wavelength LED Face Mask, USB-C Cable, 2 x Silicone Eye Comfort Pads, 2 x Adjustable Mask Straps.
StylPro Mini Microcurrent Device
Powered by microcurrents, this small yet mighty device helps to visibly lift, firm and smooth the skin, featuring three intensities to allow you to work your way up over time. Its spherical metal heads contour to the hollows and angles of the face, making it ideal for use on cheekbones, jawline, forehead and neck.
StylPro Wavelength LED Face Mask:
How To Assemble: Remove all parts of the LED Face Mask from the packaging. This includes the remote, eye comfort pads, black straps, and LED Face Mask. Place the eye comfort pads into the eye holes and ensure they are securely attached. See ‘R’ for right and ‘L’ for left on the eye comfort pads. Attach the straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward and secure to the crown of your head. Plug the wire attached to the LED Face Mask in to the top of the remote. The LED Face Mask will not work if the remote is not plugged into the mask.
Charging: Insert the USB-C Cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging. If the controller fails to charge or turn on, a reset is required. Press and hold both buttons for 20 seconds and then immediately begin charging the device, the battery icon should appear. Repeat if unsuccessful.
How To Use: Once your LED Face Mask is fully assembled, place the LED Face Mask onto your face and securely attach the straps around the crown of your head. Long press the On/Off button on the remote. This will turn on to the ‘Anti-Ageing’ mode. Short press the Mode button to switch to the ‘Target’ mode. Short press the Mode button to switch to the ‘Recovery’ mode. Short press the Mode button to switch to the ‘Balance’ mode. Once you have chosen your preferred Mode, enjoy a 10 minute session. To turn off your LED Face Mask before you have completed your 10 minute session, long press the On/Off button.
StylPro Mini Microcurrent Device:
1. Ensure your face and neck is makeup free and cleansed.
2. Apply your favourite serum on your face and neck. The microcurrents are less effective on dry skin. Do not use the device without serum.
3. Long press the On/Off button to turn on the device. Your device will beep, you will see 1 white LED light turn on at the side of the device and a red glow from the centre of the device.
4. To adjust the microcurrent intensity, short press the On/Off button. There are 3 microcurrent settings. Always start on intensity setting 1.
5. The white LED lights on the side of the device will indicate which microcurrent setting you are currently on.
6. Press both metal spheres on to your skin and slowly glide the device upwards. Glide across your cheekbones, forehead, jawline and neck. The firmer you press the device, the more powerful the microcurrents will feel.
7. Gently glide over desired areas for a whole 10-minute session.
8. Long press the On/Off button to turn off the device. Wipe clean with a damp cloth.
Frequently Bought Together
This item
StylPro At-Home LED & Microcurrent Facial Glow Bundle
€149.48
